info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Refrigerator Bi-metal Defrost Thermostat Genuine

Refrigerator Bi-metal Defrost Thermostat for ELTH-009 20584
The replacement part is made from durable high-quality material and well-tested by the manufacturer. This part fixes the following symptoms: Too warm, Fridge too warm, Frost buildup, Freezer wasn't freezing.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

ELTH-009 20584 Refrigerator Defrost Thermostat Replacement is located on the back wall of the freezer section in the refrigerator, the defrost thermostat is used to regulate the temperature of the appliance to keep the refrigerator cold and constant. A refrigerator defrost thermostat may need to be replaced if the appliance is experiencing temperature-related issues such as: too cold, too warm, frost buildup, not running, or running too long.

2(001)


SPECIFICATION

ltem NO

ELTH-009 20584

Use

Defrost/Temperature control/Protection

Appliance

Refrigerators, Freezer

Reset type

Automatic

Basic material

Bakelite, Epoxy Resin, PA

Electric rating

250V 10A

Action temperature range

-30°C~90°C

Differential

According to the requirement

Insulation resistance

≥100MΩ

Tolerance

Refer to the regulation

Life cycle

100,000 times

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum Ambient Temperature

90°C

Diameter of Bimetal Disc

F12.7mm(1/2″)

Wire Leads

Color: Red Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample Price

Free sample USD 50 freight charge, refund after mass order


PRODUCT-DETAILS

ELTH00920584sensor mesin cuci haier_


APPLICATION-SCENARIO

(001)


How to replace the defrost bi-metal thermostat in a top-freezer refrigerator?

1. Shut off the power

2. Remove the freezer shelf

3. Remove the evaporator cover

4. Pull out the defrost bi-metal thermostat and freezer wire harness

5. Remove the defrost bi-metal thermostat

6. Install the new defrost bi-metal thermostat

7. Reinstall the freezer wire harness

8. Reinstall the evaporator cover

9. Reinstall the freezer shelf

10. Restore power


FAQ_01

Hot Tags: refrigerator bi-metal defrost thermostat genuine, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample, WR51X10055 Defrost Heater Enhanced Durability, Haier Washing Machine Clutch, toshiba refregirator defrost, Automatic Washing Machine Clutc, Refrigerator Parts Door Switch, ksd defrost thermostat

Send Inquiry

(0/10)

clearall