info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

PL002 03287 Ge Refrigerator Defrost Thermostat

PL002 03287 Bimetallic Defrost Thermostat Perfect for Whirlpool, Sears, Kenmore Refrigerators
This is a true OEM replacement part used with many refrigerators. Bi-metal defrost thermostat (6" lead) protects the evaporator during the defrost cycle. Metal, wiring, and plastic parts are attached to the defrost heater in the freezer compartment. Bi-metal defrosts thermostat sold for removal and replacement Usually a screwdriver and nut driver is required.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

The refrigerator defrosts sensor also known as a defrost bimetal terminal thermostat trips when it detects that the temperature of the evaporator is getting hot enough that it may overheat. When the defrost sensor trips, it turns off power to the defrost heater. If the defrost sensor trips because it's not working properly, frost builds up on the evaporator fins, eventually preventing refrigerators and freezers from cooling well. You can check the continuity of the defrost sensor with a volt/ohmmeter.

This defrosts bi-metal thermostat (part number PL002 03287) is for refrigerators. Defrost bi-metal thermostat PL002 03287 protects the evaporator from overheating during the defrost cycle. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

This defrosts bi-metal thermostat (part number PL002 03287) is for refrigerators.

Defrost bi-metal thermostat PL002 03287 protects the evaporator from overheating during the defrost cycle.


2


SPECIFICATION

ltem NO

PL002 03287

Use

Defrost/Temperature control/Protection

Appliance

refrigerators, freezer

Reset type

Automatic

Base material

stainless steel, epoxy resin,silver,copper

Voltage

120V/240V

TEMPERATURE

OPEN:60F° CLOSE:32°F

Differential

According to the requirement

Cycle of endurance

100,000

Tolerance

Refer to the regulation

Resistive amps

10A / 5A

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC
current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum ambient temperature

90°C

Diameter of bimetal disc

25.4mm(1″)

Line

Color: white/brown/yellow/blue Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample price

Free sample,USD 50 freight charge.Refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO


What does a defrost bimetal do?

Defrost bimetal thermostats prevent the harmful buildup of frost on refrigerator and freezer evaporators. These devices trigger a defrost heater that stops frost from forming on refrigeration evaporator coils, which helps keep the refrigerator and freezer running efficiently.


FAQ_01


Hot Tags: pl002 03287 ge refrigerator defrost thermostat, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample

Send Inquiry

(0/10)

clearall