PRODUCT-INFORMATION

This part is equivalent to the effect of a fuse, it would shut off and break the defrost's electricity when the temperature reached a degree.

The refrigerator defrosts the thermostat kit. The defrost thermostat monitors the temperature of the evaporator coils. When the coils drop below a set temperature, the thermostat sends power to the defrost heater. If the defrost thermostat is defective, the refrigerator will not defrost.

PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer- Meets OEM standards - Ensures long-lasting and effective performance. The thermostat is an L48-30F which means it opens at 48 degrees F and closes at 62 degrees F.

SAVE TIME SAVE MONEY: Inexpensive way to fix or repair a refrigerator and a freezer. It stops the fridge from overheating during the defrost cycle by protecting the evaporator. This clip-on thermostat will sense the temperature increase in the evaporator during the defrost process, and will cycle the defrost heater off after the ice or frost is melted. This part fixes the following symptoms: Leaking | Freezer not defrosting | Fridge too warm | Freezer section too warm.

EASY TO INSTALL: It is made exactly fit for most top-name brands (Whirlpool, Kenmore, KitchenAid, Roper, Estate, Maytag, Inglis, Crosley, Hoover, Amana, International, Caloric). Fits models: 106.708764, 106.9630211, 106.9718280, 106.9808715, 106.9808785, 10642102300, 10642102301, 10642104300, 10642106300, 10642106301, 10660162990, etc.

REPLACEMENT PART NUMBER: This 4387503 Bimetal Defrost Thermostat replaces part numbers: 2149641, 2149643, 2163894, 2172694, 2182380, 2183072, 2221677, 4343917, WP4387503, 61002113, R0950042, WP4387503VP, PS11742474, AP6009317.

2(001)

SPECIFICATION

ltem NO	ELTH-002 23261
Use	Defrost/Temperature control/Protection
Appliance	Refrigerators, Freezer
Reset type	Automatic
Basic material	Bakelite, Epoxy Resin, PA
Electric rating	250V 10A
Action temperature range	-30°C~90°C
Differential	According to the requirement
Insulation resistance	≥100MΩ
Tolerance	Refer to the regulation
Life cycle	100,000 times
Contact material	Silver
Dielectric Strength	Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.
Insulation Resistance	With a DC 500V megger, borne DC 500V, the tested value is over 10MW.
Resistance Between Terminals	Below 50mW
Temperature characteristics	Normal close, Normal open
Maximum Ambient Temperature	90°C
Diameter of Bimetal Disc	F12.7mm(1/2″)
Wire Leads	Color: Red Length: customized
Terminal type	Customized (Refer to our specification)
Cover/Bracket	Customized (Refer to our specification)
Sample Price	Free sample USD 50 freight charge, refund after mass order

PRODUCT-DETAILS

ELTH-002 23261 refrigerator defrost thermostat_

APPLICATION-SCENARIO

(001)

How do I test my Samsung refrigerator defrost thermostat?

Place one of each of the meter's probes on each of the defrost thermostat wires while the thermostat is colder than the closing temperature. The thermostat should have continuity.

What makes our products unique?

What makes our products unique is that they always meet your needs. We deeply understand why our products are necessary for you and how they can make your life more comfortable. All are manufactured with OEM standards and are well-tested by professionals to ensure you have the best shopping experience with us.