info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Clip-on Defrost Bi-metal Thermostat

ERP ELTH-008 9179A Refrigerator Defrost Thermostat
The function of the defrost bi-metal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. If your refrigerator does not defrost properly you can test both the thermostat and the heater to figure out which part is at fault. For this repair, you will need a Phillips screwdriver, a 1/4 inch nut driver, a flat blade screwdriver, a pair of wire strippers, a roll of electrical tape, and a few butt splice connectors
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

Defrost thermostat ELTH-008 9179A is located inside the freezer compartment either directly mounted to the evaporator or indirectly mounted to the evaporator.

It has two wires (7.9" ) that connect inline with the heater and a clip on the body of the thermostat that allows it to latch onto the evaporator tubing.

The thermostat stops the fridge from overheating during the defrost cycle by protecting the evaporator.

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost process, and will cycle the defrost heater off after the ice or frost is melted.

2(001)


SPECIFICATION

ltem NO

ELTH-008 9179A

Use

Defrost/Temperature control/Protection

Appliance

Refrigerators, Freezer

Reset type

Automatic

Basic material

Bakelite, Epoxy Resin, PA

Electric rating

250V 10A

Action temperature range

-30°C~90°C

Differential

According to the requirement

Insulation resistance

≥100MΩ

Tolerance

Refer to the regulation

Life cycle

100,000 times

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum Ambient Temperature

90°C

Diameter of Bimetal Disc

F12.7mm(1/2″)

Wire Leads

Color: Red Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample Price

Free sample USD 50 freight charge, refund after mass order


PRODUCT-DETAILS

bi-metal defrost thermostatELTH-008 9179A_


APPLICATION-SCENARIO

(001)


What does a refrigerator defrost thermostat do?

A defrost thermostat works separately from the refrigeration system and is responsible for stopping frost forming on evaporators, in order to avoid the increased costs of less efficient refrigeration.


FAQ_01

Hot Tags: clip-on defrost bi-metal thermostat, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample, Electronic Refrigerator Control Board, High quality manufacturer washing machine clutch, Oem Refrigerator Defrost Thermostat, Motor Assembly Ac Pump, Frigidaire Refrigerator Defrost Thermostat, washing machine board samsung

Send Inquiry

(0/10)

clearall