info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

PL001 3018A Refrigerator Defrost Thermostat

PL001 3018A Refrigerator Defrost Thermostat Accurate for Frigidaire Kenmore Electrolux
PL001 31652 Bi-metal defrost thermostat prevents refrigerators from overheating during defrost cycles by protecting the evaporator. This clip-on thermostat will sense the evaporator temperature rise during defrosting and cause the defrost heater to melt after ice or frost builds up. The most common reasons for this part to be replaced are equipment leaks, inconsistent temperatures (too hot or too cold), icing, or equipment that has been running for too long.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

The function of the defrost bimetal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. If your refrigerator isn't defrosting properly, you can test both the thermostat and the heater to determine which part is failing. For this repair, you'll need a Phillips screwdriver, a 1/4-inch nut screwdriver, a flat-blade screwdriver, a pair of wire strippers, a roll of electrical tape, and some butt joints. PL001 3018A Fixes the following symptoms: Refrigerator too hot Freezer too hot Refrigerator won't defrost Refrigerator too cold Count on our bi-metal defrost thermostat for an unmatched combination of durability, convenient features and great value for money.


Fixes the following symptoms

1.Fridge too warm

2.Freezer not defrosting

3.Freezer section is too warm

4.Fridge too cold


2

SPECIFICATION

ltem NO

PL001 3018A

Use

Defrost/Temperature control/Protection

Appliance

refrigerators, freezer

Reset type

Automatic

Base material

stainless steel, epoxy resin,silver,copper

Voltage

120V/240V

TEMPERATURE

OPEN:60F° CLOSE:32°F

Differential

According to the requirement

Cycle of endurance

100,000

Tolerance

Refer to the regulation

Resistive amps

10A / 5A

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC
current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum ambient temperature

90°C

Diameter of bimetal disc

25.4mm(1″)

Line

Color: white/brown/yellow/blue Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample price

Free sample,USD 50 freight charge.Refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO


How does a bimetal defrost thermostat work?

A defrost bimetal thermostat works separately from the refrigerator or freezer. This device, which turns on several times a day, senses the temperature of cooling coils. ... When the frost is all melted, the bimetal thermostat will sense the temperature increase and trigger the defrost heater to turn off.


FAQ_01


Hot Tags: pl001 3018a refrigerator defrost thermostat, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample

Send Inquiry

(0/10)

clearall