info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Refrigerator Defrost Bi-Metal Thermostat PL002 03288

Refrigerator Defrost Bi-Metal Thermostat PL002 13580
Replacement parts are made of durable, high-quality materials and are well-tested by the manufacturer.
The function of the defrost bimetal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. If your refrigerator isn't defrosting properly, you can test both the thermostat and the heater to determine which part is failing. For this repair, you'll need a Phillips screwdriver, a 1/4-inch nut screwdriver, a flat-blade screwdriver, a pair of wire strippers, a roll of electrical tape, and some butt joints.
Fix the following symptoms: Refrigerator Too Hot Freezer Zone Too Hot Refrigerator Won't Thaw Refrigerator Too Cold.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

PL002 13580The refrigerator clamps the thermostat to the evaporator to prevent the evaporator from overheating during the defrost cycle. If your refrigerator won't defrost, you can test both the thermostat and the heater to find the problem.


Description:

1. Easy to install in small or narrow spaces due to slim shape.

2.3 wire leads, fuse, -14-celsius degree normally open.

3. Defrosted thermostats are a kind of thermal protector used in Air-cooling frostless refrigerators, also use as auto temperature limited switch and Heating compensated switch in the process of heating and defrosting in refrigerators.

4. Automatic temperature control for removing frost and for protecting the frozen rupture in the cold storage.


2


SPECIFICATION

ltem NO

PL002 13580

Use

Defrost/Temperature control/Protection

Appliance

Refrigerators, Freezer

Reset type

Automatic

Basic material

Bakelite

Electric rating

250V 10A

Action temperature range

-30°C~90°C

Differential

According to the requirement

Insulation resistance

≥100MΩ

Tolerance

Refer to the regulation

Life cycle

100,000 times

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC
current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum Ambient Temperature

90°C

Diameter of Bimetal Disc

F12.8mm(1/2″)

Wire Leads

Color: Red Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample Price

Free sample USD 50 freight charge, refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO


What does the bimetal thermostat do?

Bimetal Thermostats, which regulate the temperature inside heating pads, blankets, and medical pads, are used in any case where the applications need control for a low temperature. Bimetal Thermostats use two different kinds of metal to regulate the temperature setting.


FAQ_01


Hot Tags: refrigerator defrost bi-metal thermostat pl002 03288, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample

Send Inquiry

(0/10)

clearall