info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Refrigerator Bimetal Defrost Thermostat

ELTH005 15635 Refrigerator Bimetal Defrost Thermostat Easy to Install Exact Fit for Whirlpool Kenmore Refrigerators
MODEL NUMBER: ELTH-001 02325 Defrost Thermostat
SAVE TIME SAVE MONEY: Inexpensive way to fix or repair a refrigerator
EASY TO INSTALL: It is made exactly fit for most top name brands (General Electric, Hotpoint)
PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator in the freezer. The Defrost Thermostat turns off the defrost heater in case it gets too warm in the freezer section. If your refrigerator does not defrost, both the thermostat and heater can be tested to determine which part is at fault. Open the freezer door and gain access to the back panel by removing the shelves, mounting brackets (if they release), and the ice bucket. After you remove the back panel, the defrost thermostat is mounted to the end of the evaporator. Replacing the element will require basic hand tools, some disassembly of the refrigerator, and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.

2(001)


SPECIFICATION

ltem NO

ELTH-005 15635

Use

Defrost/Temperature control/Protection

Appliance

Refrigerators, Freezer

Reset type

Automatic

Basic material

Bakelite, Epoxy Resin, PA

Electric rating

250V 10A

Action temperature range

-30°C~90°C

Differential

According to the requirement

Insulation resistance

≥100MΩ

Tolerance

Refer to the regulation

Life cycle

100,000 times

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum Ambient Temperature

90°C

Diameter of Bimetal Disc

F12.7mm(1/2″)

Wire Leads

Color: Red Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample Price

Free sample USD 50 freight charge, refund after mass order


PRODUCT-DETAILS

smart thermostatELTH-005 15635_

APPLICATION-SCENARIO

(001)


How long should a refrigerator defrost cycle last?

Approximately 25 to 45 minutes.

During defrost, there will be no running sounds, no fan noise, and no compressor noise. Most models will defrost for approximately 25 to 45 minutes, usually once or twice a day. You may hear water dripping or sizzling as it hits the heater. This is normal and helps evaporate the water before it gets to the drip pan.


FAQ_01

Hot Tags: refrigerator bimetal defrost thermostat, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample

Send Inquiry

(0/10)

clearall