info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Refrigerator Defrost Bimetal Thermostat Replacement For Whirlpool

Refrigerator Defrost Bimetal Thermostat Replacement For Whirlpool PL007 21240
A defrost thermostat is a device that limits how much heat is applied to the defrost heaters typically found in refrigeration units. They allow current to flow when they reach a certain low (cut-in) temperature. During the defrost cycle, they, in turn, pass current to the defrost heaters. When the heaters cause the evaporator coils to reach a certain (cut-off) temperature, the defrost thermostat cuts out and stops the current flow to the defrost heaters. This action protects the refrigerator and the consumer from hazardous conditions and unnecessary power usage. Defrost thermostats fail often due to the large temperature swings that they are subject to.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

Refrigerator Defrost Thermostat Feature:With temperature protect thermal cut off.

Easy to install in small or narrow spaces.

Slim shape-Small size with high contacting capacitance.

Available waterproof & dustproof types with welding vinyl tube on the parts.

Refrigerator Defrost Thermostat Function:

The refrigerator defrosts thermostat is used for temperature control during defrosting in the refrigerator or the ice machine, which can be used for automatic temperature controls in the refrigerator heating compensation and electric heating defrosting. Its structure features the application of resin to completely seal the electric parts, allowing it to be installed in a narrow space and boasting humidity-proof and wet-proof.

2(001)


SPECIFICATION

ltem NO

PL007 21240

Use

Defrost/Temperature control/Protection

Appliance

refrigerators, freezer

Reset type

Automatic

Base material

stainless steel, epoxy resin,silver,copper

Voltage

120V/240V

TEMPERATURE

OPEN:60F° CLOSE:32°F

Differential

According to the requirement

Cycle of endurance

100,000

Tolerance

Refer to the regulation

Resistive amps

10A / 5A

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum ambient temperature

90°C

Diameter of bimetal disc

25.4mm(1″)

Line

Color: white/brown/yellow/blue Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample price

Free sample,USD 50 freight charge.Refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO

(001)


Where is the defrost thermostat located?

The defrost thermostat is located behind the back panel in the freezer section. Once your refrigerator has been unplugged, the next step is to give yourself clear access to that back panel. First, open the freezer side's door and remove the ice machine's bucket.


FAQ_01

Hot Tags: refrigerator defrost bimetal thermostat replacement for whirlpool, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample, digital thermostat, Washer Drain Pump Water Motor Assembly, Refrigerator Defrost Heater Replacements WR51X10055, bimetal defrost, Fridge Door Control Switch, Refrigerator Defrost Heater

Send Inquiry

(0/10)

clearall