info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

Refrigerator Defrost Thermostat Accurate For Frigidaire Kenmore

PL007 15690 Refrigerator defrost thermostat accurate for Frigidaire Kenmore
If you find that there is too much frost in the refrigerator, or the refrigerator is not defrosting, you may need to replace the defrost thermostat. To use this repaired defrost thermostat, you will need to remove the freezer shelf and freezer side panels. You will need a 1/4" nut driver, a set of wire cutters and crimpers, and a heat gun or hairdryer to complete this repair.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

Perfect Fit

This thermostat fits and works exactly like the original part. It features a mounting clip, 2 wire leads, and bare wire ends. The kit also contains heat shrink wraps.


Fix symptoms: refrigerator too hot, freezer won't defrost, freezer too hot. Fixing yourself is simple and profitable. You can install it yourself in a few minutes.Premium Quality: The replacement part is made of high-quality material and is well tested by the manufacturer. Fits OEM standards.


The defrost thermostat PL007 15690 is located inside the refrigerator and can be mounted directly or indirectly on the evaporator.

It has two wires (7.9") in series with the heater and a clip on the thermostat body that locks it to the evaporator tube.

The thermostat prevents the refrigerator from overheating during the defrost cycle by protecting the evaporator.

This clip-on thermostat will sense the temperature increase in the evaporator during defrosting and turn off the defrost heater after the ice or frost has melted.

2(001)


SPECIFICATION

ltem NO

PL007 15690

Use

Defrost/Temperature control/Protection

Appliance

refrigerators, freezer

Reset type

Automatic

Base material

stainless steel, epoxy resin,silver,copper

Voltage

120V/240V

TEMPERATURE

OPEN:60F° CLOSE:32°F

Differential

According to the requirement

Cycle of endurance

100,000

Tolerance

Refer to the regulation

Resistive amps

10A / 5A

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum ambient temperature

90°C

Diameter of bimetal disc

25.4mm(1″)

Line

Color: white/brown/yellow/blue Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample price

Free sample,USD 50 freight charge.Refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO

(001)


How does a bimetal defrost thermostat work?

A defrost bimetal thermostat works separately from the refrigerator or freezer. This device, which turns on several times a day, senses the temperature of cooling coils. When the frost is all melted, the bimetal thermostat will sense the temperature increase and trigger the defrost heater to turn off.


FAQ_01

Hot Tags: refrigerator defrost thermostat accurate for frigidaire kenmore, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample, WR51X10055 Defrost Heater Enhanced Durability, Genuine Spare Part For Select Models Of Fridge Freezers, Application Door Limit Switches, temperature thermostat, Electronic Refrigerator Control Board, defrost thermostat with fuse

Send Inquiry

(0/10)

clearall