Refrigerator Bimetal Defrost Thermostat Parts

PL007 10485 Refrigerator Bimetal Defrost Thermostat Replacement Part Easy to Install Exact Fit for Whirlpool Kenmore Refrigerators
PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meet OEM standards - Ensure long-lasting and effective operation. The function of the defrost bi-metal thermostat is to clip onto the evaporator and protect your evaporator from overheating during the defrost cycle. This part fixes the following symptoms: Fridge too warm | Freezer not defrosting | Freezer section too warm | Fridge too cold.
SAVE TIME AND SAVE MONEY: Inexpensive way to fix or repair a refrigerator. If your refrigerator does not defrost properly you can test both the thermostat and the heater to figure out which part is at fault. For this repair, you will need a Phillips screwdriver, a 1/4 inch nut driver, a flat blade screwdriver, a pair of wire strippers, a roll of electrical tape, and a few butt splice connectors.

Send Inquiry

PRODUCT-INFORMATION

Perfect Fit

This thermostat fits and works exactly like the original part. It features a mounting clip, 2 wire leads, and bare wire ends. The kit also contains heat shrink wraps.

Fix symptoms: refrigerator too hot, freezer won't defrost, freezer too hot. Fixing yourself is simple and profitable. You can install it yourself in a few minutes.Premium Quality: The replacement part is made of high-quality material and is well tested by the manufacturer. Fits OEM standards.

It works in the following cases:

1. Refrigerator is too hot

2. The freezer compartment is too hot.

3. Crema structure.

4. The refrigerator and freezer are too hot.

5. The freezer compartment does not defrost.

6. Refrigerator is too cold

7. The refrigerator works for too long.

2(001)

SPECIFICATION

ltem NO	PL007 10485
Use	Defrost/Temperature control/Protection
Appliance	refrigerators, freezer
Reset type	Automatic
Base material	stainless steel, epoxy resin,silver,copper
Voltage	120V/240V
TEMPERATURE	OPEN:60F° CLOSE:32°F
Differential	According to the requirement
Cycle of endurance	100,000
Tolerance	Refer to the regulation
Resistive amps	10A / 5A
Contact material	Silver
Dielectric Strength	Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.
Insulation Resistance	With a DC 500V megger, borne DC 500V, the tested value is over 10MW.
Resistance Between Terminals	Below 50mW
Temperature characteristics	Normal close, Normal open
Maximum ambient temperature	90°C
Diameter of bimetal disc	25.4mm(1″)
Line	Color: white/brown/yellow/blue Length: customized
Terminal type	Customized (Refer to our specification)
Cover/Bracket	Customized (Refer to our specification)
Sample price	Free sample,USD 50 freight charge.Refund after mass order

PRODUCT-DETAILS

APPLICATION-SCENARIO

(001)

How does a bimetal defrost thermostat work?

A defrost bimetal thermostat works separately from the refrigerator or freezer. This device, which turns on several times a day, senses the temperature of cooling coils. When the frost is all melted, the bimetal thermostat will sense the temperature increase and trigger the defrost heater to turn off.

FAQ_01

Hot Tags: refrigerator bimetal defrost thermostat parts, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample