info@lingtong.co    +8613858215468
Cont

Have any Questions?

+8613858215468

video

The Defrost Thermostat Whirlpool Refrigerator

PL007 15681 Refrigerator Defrost Thermostat Replacement Whirlpool
Defrost thermostat PL007 15681 is located inside the freezer compartment either directly mounted to the evaporator or indirectly mounted to the evaporator.
It has two wires (7.9” ) that connect inline with the heater and a clip on the body of the thermostat that allows it to latch onto the evaporator tubing.
The thermostat stops the fridge from overheating during the defrost cycle by protecting the evaporator.
This clip-on thermostat will sense the temperature increase in the evaporator during the defrost process, and will cycle the defrost heater off after the ice or frost is melted.
Send Inquiry

Product Introduction

PRODUCT-INFORMATION

Perfect Fit

This thermostat fits and works exactly like the original part. It features a mounting clip, 2 wire leads, and bare wire ends. The kit also contains heat shrink wraps.


Made of high-quality materials, the quality of this freezer bimetal thermostat is the same as the OEM Standards.

This refrigerator could solve the following problems: leaking, freezer not defrosting, fridge too warm, freezer section too warm, older original parts, etc.

This is a clip-on thermostat part with delicate workmanship, which will sense the temperature increase in the evaporator during the defrost process and cycle the defrost heater off after the ice or frost is melted, monitoring your freezer easily.


It works in the following cases:

1. Refrigerator is too hot

2. The freezer compartment is too hot.

3. Crema structure.

4. The refrigerator and freezer are too hot.

5. The freezer compartment does not defrost.

6. Refrigerator is too cold

7. The refrigerator works for too long.

2(001)


SPECIFICATION

ltem NO

PL007 15681

Use

Defrost/Temperature control/Protection

Appliance

refrigerators, freezer

Reset type

Automatic

Base material

stainless steel, epoxy resin,silver,copper

Voltage

120V/240V

TEMPERATURE

OPEN:60F° CLOSE:32°F

Differential

According to the requirement

Cycle of endurance

100,000

Tolerance

Refer to the regulation

Resistive amps

10A / 5A

Contact material

Silver

Dielectric Strength

Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.

Insulation Resistance

With a DC 500V megger, borne DC 500V, the tested value is over 10MW.

Resistance Between Terminals

Below 50mW

Temperature characteristics

Normal close, Normal open

Maximum ambient temperature

90°C

Diameter of bimetal disc

25.4mm(1″)

Line

Color: white/brown/yellow/blue Length: customized

Terminal type

Customized (Refer to our specification)

Cover/Bracket

Customized (Refer to our specification)

Sample price

Free sample,USD 50 freight charge.Refund after mass order


PRODUCT-DETAILS

1_

APPLICATION-SCENARIO

(001)


Where is the defrost thermostat located in the Whirlpool refrigerator?

The defrost thermostat is located behind the back panel in the freezer section. Once your refrigerator has been unplugged, the next step is to give yourself clear access to that back panel. First, open the freezer side's door and remove the ice machine's bucket.


FAQ_01

Hot Tags: the defrost thermostat whirlpool refrigerator, suppliers, manufacturers, factory, customized, wholesale, bulk, in stock, free sample

Send Inquiry

(0/10)

clearall