If the washing machine's clutch is broken, the inner tub will follow up during washing; the washing wave wheel will turn one-way/reversely; the dehydration washing does not work; no dehydration or slow dehydration; water leakage (excluding water leakage in the tub); abnormal operation A series of symptoms such as loud noise and loud noise.
The maintenance method of the inner drum follow-up rotation during washing is to adjust the position of the connecting plate and the lever, and replace the brake band; analyze the source of oil pollution, if the brake disc itself is dirty, replace the brake band and clean the brake disc. The shaft assembly is leaking oil, indicating that the brake disc and the clutch shaft riveting interface are cracked or damaged, and the washing machine clutch needs to be replaced.
Washing impeller one-way rotation/reversal abnormal sound repair method: check whether the shift fork assembly is deformed in the initial state of washing, if it is deformed, replace the shift fork assembly; if there is no deformation, the inner hole of the ratchet wheel shrinks and replace the ratchet assembly. Dehydration non-action repair method, adjust the lever and the connecting plate to the proper position, adjust the gap between the adjusting screw and the lever to 0~0.2mm, replace the ratchet spring assembly, and replace the washing machine clutch.
The basic structure of the washing machine: It includes a plastic cylindrical inner tube and a metal drum outer tube with at least one drain port. The inner tube and the outer tube are matched. The inner tube is composed of a base, a cylindrical inner tube and a port ring. One end of the barrel is connected to the base.
The other end is connected to the port ring. The inner cylinder of the cylinder is composed of two or more side wall plates and two or more ribbed plates joined to each other. The side wall plates are circular arc plates with four contour edges. The four contour edges are respectively connected with the base, the port ring and the ribbed plate, and are provided with a connection structure, and the plate is provided with a plurality of dehydration through holes.
The ribbed plate is a circular arc plate with ribs in the middle. Its four contour edges are respectively connected with the base, the port ring and the side wall plate, and are provided with a connection structure. The plate is provided with a plurality of dehydration through holes; When the plate and the ribbed plate are connected to each other to form a cylindrical inner cylinder, the ribs on the ribbed plate protrude into the cylinder to lift the ribs.
