1. An energy-saving switch is designed and installed on the side of the refrigerating room temperature controller of the refrigerator, which is used to control the temperature compensation and heating of the evaporator in the refrigerating room. When the indoor ambient temperature is lower than 10℃, press the energy-saving switch to start the compressor normally.
2. In winter, the temperature of the refrigerator compartment is slower due to the low room temperature, which causes the compressor of the refrigerator to stop for a long time and deteriorates the storage in the freezer. In order to solve this problem, an energy-saving switch is designed and installed on the side of the refrigerating room temperature controller of the refrigerator to control the temperature compensation and heating of the evaporator in the refrigerating room.
3. When the indoor ambient temperature is lower than 10°C, press the energy-saving switch. When the compressor stops running, the energy-saving switch turns on the refrigerating compartment evaporator temperature compensation heater connected in series to heat the refrigerating compartment evaporator, so that the temperature sensor tube of the temperature controller always maintains normal working conditions to ensure the safety of food in the freezer.
4. When the indoor temperature is higher than 10 degrees Celsius, the energy-saving switch needs to be turned off manually to avoid the phenomenon that the compressor does not stop running.
