The main product of the washing machine clutch, the editor below will mainly answer its three related questions. The aspects involved are some of its malfunctions and replacement issues, so that everyone can use these questions to better Understand the clutch of the washing machine, so as to make a good reserve of knowledge content for future emergencies.
Regarding the problem of washing machine clutches, there are mainly the following, specifically:
(1) The washing machine can only rotate in one direction during the washing process, but if the motor is removed to see, it is normal again. Then what is the reason?
Answer: If this problem occurs in the washing machine, it must be a problem with its clutch. The main reasons are:
The pawl is not in place, the fit between the wrap spring and the outer shaft is loose, the wrap spring head is broken or fails, the oil seal is leaking, or the gap between the top screw and the swing plate is too large. For the problems of the hold spring, it is usually replaced, and the oil seal is the same.
(2) Why is there a noise when the washing machine clutch is running?
Answer: There is noise when the washing machine clutch is running, which may be caused by the breakage of the clutch torsion spring, or the ratchet wheel and pawl are not completely separated.
(3) What should be paid attention to when changing the clutch of the washing machine?
Answer: When the washing machine replaces the clutch, the main requirement is that it must be the original one, that is, it should match the washing machine.
